| Quantity: | |
|---|---|
MA
1. Compact and lightweight: The mini cylinder is a small pneumatic component with a small size and light weight, making it easy to install and carry.
2. High output capacity: Although the mini cylinder is smaller, its output capacity is still very strong and can achieve high working pressure and output force.
3. Fast response speed: The fast response speed of the mini cylinder can make the equipment run more efficiently and accurately.
4. Simple operation: The operation of the mini cylinder is relatively simple and can easily achieve one-way and two-way movements.
BORE SIZE(MM) | DOUBLE ACTING |
FLUID | AIR |
OPERATING PRESSURE | 0.15-1.0MPA |
PROOF PRESSURE | 1.32MPA |
TEMPERATURE | 0-60 ℃ |
SPEED RANGE M/S | 30-800 |
STROKE TOLERANCE | +1.0 +1.4 |
CUSHION TYPE | BUMPER |
Bore sizelltem | A | AB | AC | AD | AF | B | C | D | DA | E | EA | ||
Back cover | CA | CM | U | ||||||||||
16 | 114 | 114 | 98 | 38 | 60 | 12.5 | 91 | 21 | 12 | 6 | 22 | M6×1.0 | 16 |
20 | 137 | 128 | 116 | 40 | 76 | 16 | 108 | 27 | 16 | 8 | 28 | M8x1.25 | 20 |
25 | 141 | 134 | 120 | 44 | 76 | 16 | 110 | 30 | 16 | 10 | 30 | M10×1.25 | 22 |
32 | 147 | 134 | 120 | 44 | 76 | 16 | 113 | 35 | 16 | 12 | 30 | M10×1.25 | 22 |
40 | 149 | 136 | 122 | 46 | 76 | 16.5 | 113 | 41.5 | 20 | 16 | 32 | M12×1.25 | 24 |
Bore size\ltem | F | FA | G | GA | H | K | KA | M | MA | MB | P | PA | |
Back cover | CA | CM | |||||||||||
16 | 10 | 5 | 22 | 6 | 5 | 6 | 7 | M16×1.5 | 16 | 16 | 16 | M5×0.8 | 7.5 |
20 | 12 | 6 | 29 | 7 | 6 | 8 | 9 | M22×1.5 | 12 | 21 | 12 | 1/8" | |
25 | 17 | 6 | 29 | 7 | 8 | 8 | 9 | M22×1.5 | 14 | 14 | 1/8" | 8 | |
32 | 17 | 6 | 32 | 8 | 10 | 10 | 12 | M24×2.0 | 14 | 27 | 14 | 1/8" | 8 |
40 | 17 | 7 | 41 | 8 | 14 | 12 | 12 | M30×2.0 | 14 | 27 | 14 | 1/8" | 8 |
Installation, use, and post maintenance
1. When there is a change in load during work, cylinders with sufficient output force should be selected
2. Under high temperature or corrosive conditions, corresponding cylinders with high temperature or corrosion resistance should be selected
3. In places with high humidity, high dust, water stains, oil stains, and welding slag, it is necessary to protect the cylinder
4. Before connecting the cylinder to the pipeline, it is necessary to clean the dirt inside the pipeline to prevent debris from entering
5. In low-temperature environments, antifreeze measures should be taken to prevent the water seal in the system from thawing
6. The cylinder should be filtered with a filter element of at least 40M before use
7. Avoid lateral loads, otherwise the piston rod is prone to deformation and thread damage. Load when one-way non returnable
8. If the cylinder is removed and not used for a long time, attention should be paid to rust prevention, and dust blocking caps should be added to the intake and exhaust ports
